Installation space

#1 What is meant by the installation space?

The installation space of an O-ring is called a “groove”. The size is defined by its width and depth. The roundness (radius) of the groove corners is also specified.

In order to achieve an optimum sealing effect, it is essential that the installation space is designed in accordance with standards. An incorrectly designed installation space is still one of the main reasons for O-ring failure.

A rectangular installation space for the O-ring is by far the most common. In addition to the rectangular groove, there are also triangular and dovetail grooves.

Triangular grooves are used for vacuum applications. It is important that almost 100% of the installation space is filled and the compression is approx. 30%.

Dovetail grooves are used, for example, if the O-ring has to be mounted overhead and would fall out during assembly in a rectangular installation space.

#2 What needs to be considered when designing the installation space?

1. The installation space should always comply with the usual market standards/tables be designed.

2. The pressing of the O-ring should ideally be between 15% and 30%

3. After pressing an O-ring, there should still be 20% of the installation space must be free

4. When designing the installation space, a distinction must be made between a static and dynamic application.

 

5. Flange gaskets are designed differently compared to Piston and rod seals.

DO YOU HAVE ANY QUESTIONS?
THEN PLEASE WRITE TO US!

Kai Becker Mitglied des Teams NH O-RING

Please send me your request and I will take care of your offer as soon as possible.

AVAILABLE O-RINGS
0
MINUTES OFFER TIME
0
NH O-RING hat 4,76 von 5 Sternen 534 Bewertungen auf ProvenExpert.com